Weathertex – Cavity Batten System
$1.36 – $357.43
- Cavity Batten 1220 x 45 x 9.5mm
- Cavity Closer Small 1830 x 10mm
- Cavity Closer Large 1830 x 20mm
Description
Description
Weathertex highly recommends the use of a cavity fixing system to provide the best protection for your wall against condensation problems such as mould, timber rot, corrosion and loss of thermal resistance. The Weathertex-endorsed cavity fixing system incorporates cavity battens over a breather membrane, acting as a physical barrier between the studs and the Weathertex cladding, allowing for the controlled escape of vapour from within the building whilst restricting the ingress of liquid moisture.
Providing separation between the vapour permeable membrane on the wall frame and external cladding, cavity battens are an integral component of the cavity fixing system. They should be fixed to each stud using galvanised nails, with a 5-10mm gap between butt joints.
When installing Weathertex weatherboards, cavity battens must be installed onto all studs. When installing Weathertex architectural panels, cavity battens must be installed onto all studs and noggings, ensuring a 20mm gap is left between nogging battens and stud battens to allow for drainage of any potential moisture.
Additional information
| Dimensions and Style | Cavity Batten 1220 x 45 x 9.5mm, Cavity Closer Small 1830 x 10mm, Cavity Closer Large 1830 x 20mm |
|---|---|
| Quantity | Loose, Pack |
Related products
-
Selex – Structural Plywood – BD – Pine Stress Grade F8
$41.44 – $6,444.48Select options This product has multiple variants. The options may be chosen on the product page -
Black Stallion Film Faced Plywood
$61.66 – $5,069.95Select options This product has multiple variants. The options may be chosen on the product page -
Black Stallion Formply – Stress Grade F17
$136.00 – $6,130.39Select options This product has multiple variants. The options may be chosen on the product page -
Non Structural – Meranti Plywood
$40.61 – $8,153.04Select options This product has multiple variants. The options may be chosen on the product page